A Guide to Bath Installations
Bath Installations can be tricky. Even if you have a background in construction and plumbing, you might not be comfortable performing this task yourself. Using this guide to install a bathtub can give you an idea of what you will need to do, and if you are not sure of any steps, you should contact a plumber. A plumber will be able to make sure that your bathtub is installed properly, and that there are no hazards in the process.
A professional will also ensure that the materials you buy are protected from breakage. Often, fragile items, such as glass and porcelain, may break while being transported. Using experienced installers will ensure that these materials are handled with care. Often, a professional will offer a money-back guarantee or a warranty. It is worth the investment to hire a professional for your bathroom installation. While you can try to save some money by doing it yourself, you will likely end up with a bathroom that does not meet your expectations.
If you’re looking for a bathroom upgrade, you can also consider a freestanding bath. These are great if you’re looking for a modern, clean look. They are typically mounted under the material of a deck. A drop-in option is also a great option for many baths. In either case, your bath installation will be an eye-catcher in your bathroom. There are even freestanding baths and corner baths. These are usually five-sided, with clover-shaped bathing well, designed to accommodate two bathers. When you hire a bath installation company, you’ll enjoy the benefits of professional service, quality work, and a lifetime guarantee.
Cost. The cost of a new bathtub installation depends on the type of bathtub, the type of fixtures, and the extent of bathroom modifications. The costs can range from $1,000 to over $5,000 depending on the type of tub you’re looking for and the amount of work needed to complete the project. On the other hand, you can perform an installation yourself if the tub is easy to install and make sure the tub is level. Before installing it, you’ll need to fit in the bathtub surround and secure the flanges to the wall studs. Then, you’ll need to connect the water line and caulk.
A drop-in bath is an attractive option that features a shower over it. The self-rimming edge rests on the surface of the deck, which is usually stone or tile. An under-mount installation can be performed by installing a kit. An alcove bath, on the other hand, is recessed in a nook. Alcove baths are designed for a three-wall alcove installation. Their exteriors are unfinished, and many of them feature tile flanges on all three sides. A few of them even feature an integral apron.
Walk-in tubs have numerous benefits. They prevent falls while bathing and have safety features such as non-skid floors, grab rails, and a safe seat. These tubs also have a seal around the door, which keeps water in. In addition to being aesthetically pleasing, walk-in tubs are also extremely practical. They allow the aging population to enjoy a relaxing bath with ease and can help promote independence.
Before installing a new tub, you should make sure that your tub is level. Then, you should carefully place the back section of the surround on the tub rim. Then, you should secure it in place with a nail placed just above the top flange. Make sure that the panels are level. If they are not, use shims. They should be aligned to within an eighth inch. This is important because you don’t want to make any mistakes when installing a new bathtub.
Refinancing a bathtub is another common option. The cost of reglazing a tub can be between $30 and $77 per square foot. While it isn’t a permanent renewal, the process should still give you a beautiful new bathtub for several years. A new tub also adds value to your home and extends its appeal to prospective buyers. Not only does it look good, but it also offers a relaxing experience.